Specifying The Manual Color Sequence; Using The Manual Color Sequence - Brother 884-T23 Operation Manual

Specifying the manual color sequence

Memo
• The [Manual Color Sequence] cannot be changed
while operations are being performed in the
embroidering screen.
a Touch , then
 The general settings screen appears.
b Locate [Manual Color Sequence] in the Settings pages.
c Touch [ON] to select the manual color sequence.
• When the machine is purchased, [OFF] is selected.
d Touch to return to the previous screen.
 The icon for [Manual Color Sequence] appears in the
screen.
60
.

Using the manual color sequence

■ Manually assign thread colors to all needle
bars
By specifying the thread colors used with this machine,
embroidery can continue more efficiently simply by
changing the needle bar assignments after a pattern is
selected. With the normal method of specifying settings,
only a maximum of 5 needle bars can be manually
assigned thread colors; however, with the manual color
sequence, all 6 needle bars can be assigned thread colors.
(For details on specifying the settings, refer to page 107.)
■ Needle bar number settings
The needle bar used with each thread color can be
specified.
Memo
• Using the procedure described in "Reserved
needle bar and embroidery speed settings" on
page 107, the finished embroidery colors can be
checked in the screen if thread colors are assigned
to thread spools.
In the embroidering settings screen, touch
a
 A screen appears, allowing the needle bar numbers
to be selected.
From the thread color sequence display, select the
b
thread color whose needle bar is to be changed.
• If the desired thread color is not displayed, use the
scroll bar on the right side to display it.
1
1 Scroll bar
.