Subaru Outback 2011 Owner's Manual page 434

! Low beam light bulbs
1. Pull off the fender lining. For details,
refer to "Pulling off the fender lining" F11-
10.
2. Remove the bulb cover, by turning it
counterclockwise.
3. Disconnect the electrical connector.
4. Remove the retainer spring.
5. Replace the bulb, then set the retainer
spring securely.
6. Reconnect the electrical connector.
Maintenance and service
7. Install the bulb cover.
8. After replacing the bulb, reattach the
fender lining.
– CONTINUED –
11-59