Subaru Outback 2011 Owner's Manual page 31

1-6
Seat, seatbelt and SRS airbags
. The select lever is in the "P" position
(AT and CVT models).
LHD models
RHD models
2. While pressing the "SET" button, press
the desired button "1" or "2".
3. The chirp sound sounds once, and the
seat position is registered.
! Registration of seat position with
each access key
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the "LOCK"/
"OFF" position.
. The select lever is in the "P" position
(AT and CVT models).
LHD models
RHD models
2. While holding the access key and
pressing the "SET" button, press the "
button of the access key.
3. The chirp sound sounds once, and the
seat position is registered.
! Retrieval of seat position registered
with button "1" or "2"
WARNING
Be sure to press the correct button
to retrieve your registered seat
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
"