Menu #3 - Remote Start Options - Clarion SR9000 Installation Manual

menu #3 - remote start options

FEATURE
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-14
3-15
*NOTE: The Prosecurity programmer can set 1-90 seconds.
**NOTE: The Bitwriter can set 1-16 minutes.
44
ONE-CHIRP SETTING (DEFAULT)
Engine checking ON
Engine checking TACH
Run time: 12 minutes (1)
Parking lights flashing
Crank time: 0.6 seconds (1)
Voltage check - high
Short Run/Turbo–1 min. (1)
Activation pulse count–1
2 nd Ignition/Acc output: ignition
Acc state during wait to start: OFF
2 nd status output: Normal (1)
Anti grind: ON
Diesel timer Wait-to-Start input (1)
Timer mode—Timed Starts
Run Time (Timer Mode) 12 minutes (1) 3 (2), 6 (3), 9 (4) minutes**
TWO-CHIRP SETTING
Engine checking OFF
Engine checking VOLTAGE
Run time: 24 (2) or 60 (3) minutes
Parking lights constant
0.8 (2), 1.0 (3), 1.2 (4), 1.4 (5),
1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9) sec.
Voltage check - low
3 (2), 5 (3), 10 (4) min.
Activation pulse count: 2
Accessory
ON
Rear defogger: latch 10 min. (2)/
pulse (3)
Anti grind: OFF
Timed 15 (2), 30 (3),
45 (4) seconds*
Temperature Starts
© 2007 Directed Electronics—all rights reserved