C-Arm Cover; Covers Of The Horizontal Carriage - Siemens POWERMOBIL Manual

3 - 10
•
When running cables along the frame for the PC boards D1 and D30 (Fig. 22), make
sure that they are not crushed when inserting and tightening the frame.
•
Fix the run cables using cable ties.
•
Refit the plate (3/Fig. 21).
Fig. 23

C-arm cover

•
Secure the front C-arm cover to the image intensifier side of the C-arm (Fig. 23).
When inserting cables make sure that they are not crushed or torn off.

Covers of the horizontal carriage

•
Refit the cover plate (2/Fig. 24).
•
Reattach the cable in the cable clamps. Make sure that the shielding makes good ground
contact.
•
Screw the protective ground wire to the cover of the horizontal carriage.
•
Reconnect the plugs of the brake button and of the Emergency Stop switch.
•
Lift the cover above the horizontal carriage and fasten it with screws (1/Fig. 24).
POWERMOBIL
Fig. 24
SPR2-240.841.01
Rev. 01 05.03
Installation
Page 10 of 10
CS PS 24
3
3
Siemens AG
Medical Solutions