Specifying Sewing Attributes - Brother PE-DESIGN V7 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)
a
Note:
You can set the sewing attributes for the
selected line and region sew types in the
Sewing Attribute Setting dialog box.
When you select Prog. Fill Stitch, Motif
Stitch or Piping Stitch with the Use Motif
check box selected, you also need to select
their pattern in the Sewing Attribute
Setting dialog box, as there is no default
pattern setting.
c
"Line sew" on page 148, "Region sew" on
page 148 and "Specifying sewing
attributes" below
Specifying sewing
attributes
Various sewing attributes for lines and regions can
be set in the Sewing Attribute Setting dialog box
Toolbar button:
1.
Click one of the Tool Box buttons used to draw
or select objects.
2.
Click in the Toolbar
→ The Sewing Attribute Setting dialog box
appears.
Beginner mode:
151
Expert mode:
b
Memo:
• An alternate method to start this dialog box
is to select the menu command Sew –
Setting Attribute.
• The sewing attributes displayed in the
dialog box depend on the selected sew
type.
3.
To display only basic sewing attributes and
simpler settings, click To Beginner mode.
To display all of the sewing attributes and
settings available for the selected sew type,
click To Expert mode.
b
Memo:
• Settings that cannot be selected in
Beginner mode are retained from the
previous setting in Expert mode.
• To hide the preview box, click Hide Hint. To
display the preview box, click Show Hint.
When the Hide Hint button is displayed, the
preview box is displayed, allowing you to
view a stitching sample when the pointer is
moved over the setting. The preview box
shows the setting changes that you make.
4.
If necessary, change the sewing attributes
displayed under Line Sew or Region Sew.