Displaying A Preview Of The Embroidery - Brother PE-DESIGN V7 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)
Displaying a preview of the
embroidery
Once the embroidery design is complete, you can
display a preview of it in order to see how the
stitching is connected, or you can display a realistic
preview of it in order to see how the design will
appear once it is sewn.
1.
To display a preview of the embroidery
design, click Display on the menu bar, and
then click Preview.
An alternate method is to click the Toolbar
button indicated below.
Preview
→ A preview of the embroidery design
appears.
b
Memo:
To zoom in (or out), click
Box, click (or
desired area of the embroidery design.
2.
To leave the preview display, repeat step
or press the Esc
3.
To display a realistic preview of the
embroidery design, click Display on the menu
bar, and then click Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
Realistic Preview
on the Tool
), and then click the
1.
,
key.
→ A realistic preview of the embroidery
design appears.
b
Memo:
To zoom in (or out), click
Box, click (or
desired area of the embroidery design.
4.
To leave the realistic preview display, repeat
3.
step , or press the
a
Note:
The embroidery design cannot be edited
while the realistic preview is displayed.
I
Changing realistic preview
settings
Set the realistic preview settings for the desired
realistic preview display.
1.
Click Display, then Realistic Preview
Attribute Setting.
→ A Realistic Preview Attribute dialog box
similar to the ones shown below appears.
When a realistic
preview is displayed
2.
Use the Thread Width slider to set how wide
the thread will appear.
on the Tool
), and then click the
key.
Esc
When a realistic
preview is not
displayed
172