Editing The Points Of A Font Character Pattern; Moving Points; Inserting Points - Brother PE-DESIGN V7 Instruction Manual

Editing the Points of a Font Character
Pattern
The points that you move or insert are positioned at the intersection of the horizontal and vertical lines of the
grid. Regardless of where you drag a point to or insert a point on the line, it will automatically be positioned at
the nearest intersection.

Moving points

1.
Click on the Tool Box.
→ The shape of the pointer changes to
2.
Click the pattern that you want to edit.
→ The points in the pattern appear as small
empty squares.
b
Memo:
You can only select one pattern at a time.
3.
Click the point that you want to move.
→ The selected point appears as a small
black square.
b
Memo:
• To select additional points, hold down the
key and click each point, or drag the
Ctrl
pointer over the points that you want to
select.
• To select the previous (or next) point in the
line, hold down the
→ ( or ← ) key.
the
a
Note:
If you click the line of the pattern instead of a
point, a new point is inserted.
Creating Custom Fonts (Font Creator)
Ctrl key and press
4.
Drag the point to the new location.
→ All of the selected points move in the
same direction.
b
Memo:
• To move the point horizontally or vertically,
hold down the
.
• Pressing the arrow keys moves the
selected point one grid mark in the direction
of the arrow on the key. If the grid is not
displayed, the point moves a distance
smaller than the smallest grid interval in the
direction of the arrow on the key.
• Holding down the arrow key for the desired
direction continues moving the outline in
that direction.

Inserting points

1.
Click on the Tool Box.
→ The shape of the pointer changes to
2.
Click the pattern that you want to edit.
→ The points in the pattern appear as small
empty squares.
b
Memo:
You can only select one pattern at a time.
3.
Click the line to add a new point.
→ A new point appears selected (as a small
black square).
b
Memo:
If a point is inserted in a straight block-type
punching pattern, curved block-type punching
pattern or semi-automatically created block-
type punching pattern, a point is also
automatically inserted in the connecting line
along the sewing direction. In addition, in this
case, a point cannot be inserted in the line
parallel to the sewing direction.
Shift key while dragging it.
.
248