Flipping Patterns Horizontally; Flipping Patterns Vertically; Rotating Patterns - Brother PE-DESIGN V7 Instruction Manual

1.
Click , or click Edit, then Paste.
→ The patterns saved on the Clipboard
(using the Cut or Copy command) are
pasted into the work area.
c
"Cutting out patterns" on page 245,
"Copying patterns" on page 245 and
"Duplicating patterns" on page 245
Flipping patterns
horizontally
You can flip the selected pattern(s) horizontally (left/
right).
1.
Select one or more patterns.
2.
Click Edit, then Mirror, then Horizontal.
→ The selected pattern(s) are replaced by
their horizontal mirror image (top and
bottom inverted).
b
Memo:
To restore the image to its original orientation,
select the menu command Edit
Horizontal again.
c
"Flipping patterns vertically" on this page
and "Rotating patterns" on this page
Flipping patterns
vertically
You can flip the selected pattern(s) vertically (up/
down).
1.
Select one or more patterns.
2.
Click Edit, then Mirror, then Vertical.
→ The selected pattern(s) are replaced by
their vertical mirror image (left and right
inverted).
b
Memo:
To restore the image to its original orientation,
select the menu command Edit
Vertical again.
c
"Flipping patterns horizontally" on this
page and "Rotating patterns" on this page
Creating Custom Fonts (Font Creator)
– –
Mirror
– –
Mirror

Rotating patterns

You can manually rotate the selected pattern(s) by
an arbitrary angle.
1.
Select one or more patterns.
2.
Click Edit, then Rotate.
→ The handles around the selected pattern
are replaced by empty squares at the four
corners of the selected pattern.
3.
Move the pointer over one of the four rotation
handles.
→ When the pointer is moved over a rotation
handle, the shape of the pointer changes
to .
246