Entering Monograms (Layout & Editing); Step1 Creating Monograms - Brother PE-DESIGN V7 Instruction Manual

Entering Monograms (Layout & Editing)
Using the monogram function, ornamented characters arranged in a decorative pattern can be created.
This procedure will go through each step of the basic operation.
Step 1 Creating monograms
Step 2 Changing the font and character size
Step 3 Changing the thread color and sew type
Step 4 Adjusting the size and position of the decorative pattern
Step 5 Saving the embroidery design
Step 6 Transferring the design to an original card
Step 1 Creating monograms
As an example, we will create a monogram with a
decorative pattern added to the letters "ABC".
1
Start up Layout & Editing.
Click , then select All Programs,
then PE-DESIGN Ver7, then Layout &
Editing.
2
Select the monogram tool.
Click , then
Tutorial
.
Diamond and script fonts are exclusively used
for monograms. But you can use other built-in
fonts and True Type Fonts.
The illustration above allows you to change
the font, size and sew type.
3
Enter the letters.
Click in the Design Page where you want the
monogram to appear.
Type "ABC" using the computer key board.
a
Note:
• You can also enter a character by
selecting it in the character table, then
clicking Insert, or simply by double-
clicking it.
• You cannot insert line feeds. If you press
the key, the dialog closes and the
Enter
monogram pattern is displayed in the
Design Page.
66