Brother PE-DESIGN V7 Instruction Manual page 238

Manually Creating Embroidery Patterns From Images (Design Center)
→ A preview of the embroidery pattern
appears.
b
Memo:
To zoom in (or out), click
Tool Box, and then click the desired area of
the embroidery pattern.
2.
To leave the preview display, repeat step
or press the
Esc
a
Note:
The embroidery pattern cannot be edited
while the preview is displayed.
3.
To display a realistic preview of the
embroidery pattern, click Display on the menu
bar, and then click Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
Realistic Preview
→ A realistic preview of the embroidery
pattern appears.
b
Memo:
To zoom in (or out), click
Tool Box, and then click the desired area of
the embroidery pattern.
(or ) on the
1.
key.
(or ) on the
4.
To leave the realistic preview display, repeat
3.
step , or press the
a
Note:
• The embroidery pattern cannot be edited
while the realistic preview is displayed.
• The Realistic Preview function cannot
display a clean preview of the pattern if the
monitor is set to 256 colors or less. The
monitor should be set to at least 16-bit
High Color (65536 colors).
I
Changing realistic preview
settings
You can change the realistic preview settings to
better view the embroidery pattern. (This function is
available only in the Sew Setting Stage.)
1.
Click Display, then Realistic Preview
Attribute Setting.
,
→ A Realistic Preview Attribute dialog box
similar to the ones shown below appears.
2.
Use the Thread Width slider to set how wide
the thread will appear.
3.
Use the Contrast slider to set the contrast.
4.
Use the Brightness slider to set how bright
the display is.
5.
Click Apply to display a realistic preview of the
patterns with the new settings (when the
realistic preview is displayed).
Or, click OK to save the settings for the next
time that the Realistic Preview function is
select (when the realistic preview is not
displayed).
b
Memo:
To close the dialog box without applying the
changes to the settings, click Close or
Cancel.
c
"Displaying a preview of the embroidery"
on page 231
key.
Esc
232