Creating Custom Stitch Patterns
(Programmable Stitch Creator)
Programmable Stitch Creator allows you to create and edit programmable fill stitch and motif stitch patterns,
which can be used in both Layout & Editing and Design Center. More decorative stitch patterns can be
designed by using these patterns.
This procedure will go through each step of the basic operation.
Step 1
Step 2
Step 3
Step 1
Opening a programmable
stitch pattern
First, we will open the fill stitch pattern to be
edited. In this example, we will use stitch pattern
wave1.pas.
1
Start up Programmable Stitch Creator.
Click
then PE-DESIGN Ver7, then Programmable
Stitch Creator.
2
Open the programmable fill stitch pattern.
Click File, then Open.
307
Tutorial (Advanced)
Opening a programmable stitch pattern
[Case 1] Drawing lines to edit the stitch pattern
[Case 2] Creating patterns (embossing/engraving) for region sewing (Fill/Stamp mode)
[Case 3] Reshaping a single line to create custom stitch patterns (Motif mode)
Saving the edited stitch pattern
, then select All Programs,
Select the stitch pattern file wave1.pas in the
Pattern folder.
Click Open, or double-click the files icon.