Redialing When The Line Is Busy; Manual Redialing; Canceling Manual Redialing; Automatic Redialing - Canon FaxPhone L80 User Manual

Redialing When the Line is Busy

There are two methods of redialing: Manual redialing and Automatic redialing. This
section explains these two methods.

Manual Redialing

Press Redial to dial the last number you dialed with the numeric buttons. (This starts
redialing regardless of whether automatic redialing is enabled.)

Canceling Manual Redialing

To cancel manual redialing, press Stop/Reset.

Automatic Redialing

What is Automatic Redialing?

When you are sending a document using memory sending (1 p. 7-5) and the other
party's line is busy, your machine waits the specified time interval and then redials the
number automatically. This is called Automatic redialing.
You will know that your machine is waiting to redial when AUTO REDIAL and the
transaction number (TX/RX NO.) are displayed in the LCD.
The automatic redialing options allow you to customize the number of times your
machine redials, as well as the time interval between redials. You can also disable
automatic redialing if you prefer your machine not to do so.
If all automatic redialing attempts are unsuccessful, the machine cancels the
transmission and prints an ERROR TX REPORT to notify you that the transmission was
not completed (1 p. 11-4).

Canceling Automatic Redialing

Automatic redialing cannot be canceled with the Stop/Reset button while the machine
is waiting to redial. You can either wait until your machine begins redialing and then
follow the procedure below, or if you want to cancel while your machine is waiting to
redial, you will have to delete the document from memory (1 p. 9-8).
Follow this procedure to cancel automatic redialing when your machine begins
redialing:
1
Wait until your machine begins redialing.
Chapter 7
DIALING
Sending Faxes
7-9