Dialing With The Directory - Canon FaxPhone L80 User Manual

Dialing with the Directory

Even if you forget under which of the one-touch speed dialing buttons, coded speed
dialing codes, or groups you registered a particular fax/telephone number, the directory
function allows you to look up and dial the correct number from the first letter of the
other party's name.
Follow this procedure to send a document with the directory function:
1
Load the document, face down in the
ADF (1 p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
2
Press Directory.
3
Use the numeric buttons to enter the
first letter of the other party's name
you are looking for.
Press ∂ or ¨ to scroll through the
4
names until the name you are looking
for appears.
• If you press ∂ when the last entry in the
directory is displayed, the list returns to
the first entry in the directory.
• A two-digit number appears next to the
name registered under a one-touch
speed dialing button. An asterisk (T)
and a two-digit number appear next to
the name registered under a coded
speed dialing code.
• After the name appears, you can display
the registered fax/telephone number by
pressing ¬ or ®.
5
Press Start/Copy to begin scanning
for sending, or if you press Set
instead, wait a few seconds for the
machine to begin scanning
automatically.
• To cancel sending once dialing has
started, press Stop/Reset then T
(1 p. 7-8).
6-18
Speed Dialing
1ST LETT OF NAME
01=Canon EUROPA
T 01=Canon Inc.
Chapter 6