Troubleshooting - Canon PIXMA MP800R Setup Manual

Troubleshooting

Cause and measures on possible troubles in the setup procedure are explained here.
Note
If you do not find a description for your trouble here, refer to "Troubleshooting" on the User's Guide and
the Network Guide.
Troubles in setup/connections
"Cannot connect to the access point (the access point is not detected)" on page 56
• "The target access point is not detected" on page 57
• "Cannot connect to the target access point" on page 57
• "Using the machine in a multiple access point setup" on page 58
"How to set a network key/network password" on page 58
• "About Network Key (Windows)/Network Password (Macintosh)" on page 58
• "How to set a WEP/WPA key" on page 59
"Cannot connect to the machine (the machine is not detected)" on page 60
• "The machine is not detected" on page 60
• "No printer is detected after the network settings are changed in Windows" on
page 61
"The following screen is displayed during setup" on page 61
• "The [Access Points] dialog box is displayed during setup" on page 61
• ""An access point could not be detected" is displayed during setup" on page 63
• ""Printer could not be connected to the specified access point" is displayed during setup" on
page 63
• ""Another access point with the same SSID exists" is displayed during setup" on page 63
• "The [Set Printer IP Address / Printer IP Address Setup] dialog box is displayed during setup"
on page 64
• "The [Printer Network Setup] dialog box is displayed during setup" on page 66
• "The [Enter Password / Password Input] dialog box is displayed during setup" on page 66
• ""You have connected the printer to an unsecured wireless network" is displayed during setup"
on page 67
• ""Communication with the Card Slot failed" is displayed during setup" on page 67
• ""The Card Slot is already mapped as Network Drive to this computer" is displayed
during setup" on page 68
• ""Cannot map any more drives, because all the drive letters are assigned" is
displayed during setup" on page 68
"Re-setting the machine" on page 69
• "Re-setting the machine" on page 69
"The admin password set to the machine was forgotten" on page 69
• "The admin password was forgotten" on page 69
"Changing the port name" on page 69
• "Changing the port name" on page 69
"Troubles in the network setup of the Card Slot" on page 70
• "Unable to determine whether the Card Slot is mounted" on page 70
• "The available drive letter cannot be selected on the [Network Setup of the Card Slot]
dialog box" on page 70
Troubleshooting 55