The [Printer Network Setup] Dialog Box Is Displayed During Setup; The [Enter Password / Password Input] Dialog Box Is Displayed During Setup - Canon PIXMA MP800R Setup Manual

Problem
The [Printer Network
Setup] dialog box is
displayed during
setup
The [Enter Password /
Password Input]
dialog box is
displayed during
setup
66 Troubleshooting
Possible Cause and Measures
The [Printer Network Setup] dialog box is displayed in the following
cases.
- when you are re-setting a machine whose setup was canceled halfway
- when you changed the network settings
- when you are already using a machine over a wireless or wired LAN
If you canceled setup or changed the network settings, perform network
setup again. When you intend to use the machine connected to the
network with the current settings, do not change the network settings.
Change printer settings
The machine network settings will be changed to enable
communication under the current network settings.
Do not change printer settings
Continues computer setup with the settings specified to the machine.
Select this when you are not currently connected to a network but
want to set up the computer with the settings specified to the machine.
Note
After setup, confirm that the machine and the computer (or the access point, when
using wireless LAN) can communicate with each other. If not, perform network setup
again.
The following dialog box is displayed if an administrator password is
set to the machine which has already been set up.
Admin Password
Enter the administrator password you have set. The administrator
password consists of alphanumeric characters and is no longer than
32 characters. The password is case sensitive.
For security, your entry will be displayed by "*" (asterisks) for Windows
and "•" (bullets) for Macintosh.