Setting Up The Machine And The Computer; (Macintosh); Installing The Software - Canon PIXMA MP800R Setup Manual

Setting Up the Machine and the Computer

(Macintosh)

Installing the Software

The following software programs are included on the Setup CD-ROM:
MP Drivers
Easy-PhotoPrint
Canon IJ Network Tool
* The contents of the Setup CD-ROM may differ depending on the country of purchase.
Important
Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not
supported.
Note
When the Canon IJ Network Tool is installed, the Canon IJ Network Scan Utility will also be installed.
1
Place the Setup CD-ROM in the CD-ROM drive.
Note
If the CD-ROM does not run automatically, double-click the CD-ROM icon on the desktop.
2
Double-click the [Setup] icon.
3
When the [Authenticate] screen appears, enter your administrator name and
password, and then click [OK].
Note
If you do not know your administrator name or password, click
the screen, then follow the on-screen instructions.
If the [Select Language] screen appears, select a language, then click [Next].
If the place selection message appears, select your place of residence, then click [Next].
4
Follow the instructions displayed on the
screen. When the screen shown on the right
is displayed, click [Easy Install].
Note
When you select [Easy Install], the items included in
the CD-ROM are installed automatically.
To select particular items to install, click [Custom
Install] and follow the instruction on the screen.
On-screen Manual
ArcSoft PhotoStudio
Setting Up the Machine and the Computer (Macintosh)
MP Navigator
ScanSoft OmniPage SE
on the lower-left corner of
39