Re-Setting The Machine; The Admin Password Set To The Machine Was Forgotten; Changing The Port Name; The Admin Password Was Forgotten - Canon PIXMA MP800R Setup Manual

Re-setting the machine

Problem
Re-setting the
machine

The admin password set to the machine was forgotten

Problem
The admin password
was forgotten

Changing the port name

Problem
Changing the port
name
Possible Cause and Measures
Restore the machine to the factory default and set up the machine
again. For details, see
page 72. For setup procedures, see
Environment" on page
Possible Cause and Measures
Restore the machine setting to factory default. All settings previously
set will be lost after initialization. Set up the machine again to use it.
For details, see "Initializing using the Operation Panel" in
Initializing Network Settings" on page
Possible Cause and Measures
To change the port name, click [Set Port Name] in the [Setup Results]
dialog box.
The [Set Port Name] dialog box is displayed, where you specify the
port name. By changing the port name, you can change the name of
the machine. When you set up an additional computer to use the
machine whose port name you changed, the machine is displayed
with the changed port name.
When two or more computers are set up, the changed name is
displayed. When multiple computers or printers are present, this can
be used to change the name to one that is easy to remember.
Port Name
Port names should consist of alphanumeric characters and be no
longer than 24 characters (12 characters under Windows Me or
Windows 98), excluding the prefix. The port name includes the fixed
prefix "CNBJNP_", which you do not need to enter.
"Printing and Initializing Network Settings" on
"Confirming the Setup
19.
72.
Troubleshooting
"Printing and
69