Align The Printhead - Canon MultiPASS MP730 Setup Sheet

Align the printhead.

NOTE
• You can also align the printhead from the software.
For details, refer to the Software Guide.
When the LCD A displays the following, press [Set].
1
A L I G N P R I N T H E A D
P R E S S S E T K E Y
The machine will print a horizontal pattern, and the LCD will display:
C H A N G E H V A L U E
A 0
Column A Value for column A
2
In column A on the printout, note the value of the box with the most solid image.
Then use [2] or [3] on the operation panel to select that value.
Then press [Set].
3
Repeat step 2 for columns B to K.
4
When values for all columns have been entered and the LCD displays the following,
press [#] to return to standby mode.
P R I N T V E R T . P A T T E R N ?
Y E S = ( A )
N O = ( # )
BAD
SAMPLE
Least solid
box
GOOD
SAMPLE
Most solid
box
NOTE
• If a display other than <ALIGN
PRINT HEAD> appears, refer to
A
p. 9-5 of the Quick Reference
Guide to align the printhead.
NOTE
• If streaks appear on the printed
surface when you use the machine,
perform the vertical printhead
alignment. For details, refer to p. 9-5
of the Quick Reference Guide.