Step 6: Align The Printhead - Canon MultiPASS F50 Setup Instructions

Step 6: Align the Printhead

1. Place a stack of paper in the multi-purpose tray in preparation for printhead
alignment.
2. Once the printhead has been installed ALIGN PRINTHEAD/PRESS SET KEY will
display on the LCD panel.
Press the key once.
3. The F50 MFP will print a vertical line pattern, and the LCD message will change
to:.
4. Review the vertical pattern printout, noting which box in Column A prints with the
most solid image.
For the A Column printed pattern, use the key to scroll to the value for the
most solid box in the column.
NOTE: If you have difficulty on Column A when choosing between two patterns, use
the larger value number.
Press to select. CHANGE V VALUE will appear again, this time for Column B:
5. Repeat Step 4 for patterns B through F on the printout.