Connect The Power Cord - Canon MultiPASS MP730 Setup Sheet

Connect the telephone line and any necessary external device,
and set the receive mode.
You can connect an external
device (telephone or answering
machine) if necessary.
Connect the telephone line
cord to the wall jack.
NOTE
• Before using your machine, you need to make
sure it is set for your telephone line type.
For details, see p. 6-4 of the User's Guide.
• Refer to the receive mode instructions after the
unit is powered on.

Connect the power cord.

IMPORTANT
• Before turning on the power, make sure the document cover A is closed.
1
Plug the power
cord into a socket.
A
P L E A S E W A I T
Approx. 30 seconds
P U T I N C A R T R I D G E P U T I N C A R T R I D G E
2
When you connect
the machine, the
Alarm light blinks,
and the messages
above should
appear in the LCD.
Connect external devices as follows:
= Telephone line jack
= External device jack
Telephone or answering machine
Telephone
Machine
line
Telephone and answering machine
Telephone
Machine
line
Built-in computer modem and telephone
Telephone
Machine
line
Set the receive mode as follows:
1
On the operation panel, press [Fax], [Menu], then [Set].
Ex:
R E C E I V E M O D E
F A X / T E L A U T O S W
2
Use [2] or [3] to select the receive mode:
• Select:
– <FAX/TEL AUTO SW> to receive both faxes and voice calls
(a telephone must be connected to the machine).
– <FAX ONLY MODE> to receive faxes only.
–<DRPD> if you have subscribed to a DRP (Distinctive Ring Pattern)
service offered by some companies. (For details, refer to the Quick
Reference Guide.)
–<MANUAL MODE> to answer all voice and fax calls manually
(a telephone must be connected to the machine).
–<ANS.MACHINE MODE> to receive faxes automatically and route
voice calls to an answering machine connected to your machine.
For more details on the different receive modes, refer to p. 9-1 of
the User's Guide.
ON/OFF(1sec.)
03 04
07 08
3
If nothing appears in the LCD,
press [ON/OFF (1 sec.)] to turn on
the machine.
• If you need to turn off the machine,
press [ON/OFF (1 sec.)] for one second.
Telephone or
answering machine
LINE TEL
Telephone
Answering
machine
LINE TEL Telephone
Computer
Turn over to
Turn over to
continue
continue