Align The Printhead - Canon MultiPASS F80 Setup Sheet

Align the printhead.

NOTE
• If you will be installing the MultiPASS Suite software, you can also align the printhead
from the software. For details, see p. 10-8 of the Basic Guide.
1
When the LCD displays the following, press [Set].
A L I G N P R I N T H E A D
P R E S S S E T K E Y
The machine will print a horizontal line pattern, and the LCD will display:
H A N G E H V A L U E
A 0
Column A Value for column A
2
In column A on the printout, note which box has the most solid image. Note the
value next to this box and use [2] or [3] on the operation panel to enter it.
Then press [Set].
3
Repeat step 2 for columns B to F.
4
When values for all columns have been entered and the LCD displays the
following, press [#] to return to standby mode.
R I N T V E R T . A T T E R N ?
Y E S = ( ) N O = ( # )
A
BAD
SAMPLE
Least solid
box
GOOD
SAMPLE
Most solid
box
1 2 3
4 5 6
7 8 9
0 #
NOTE
• If streaks appear on the printed
surface when you use the machine,
perform the vertical printhead
alignment. For details, see p. 10-7 of
the Basic Guide.