Align The Printhead - Canon imageCLASS MP730 Setup Sheet

Align the printhead.

NOTE
• If you are installing the software, you can also align the printhead from the software.
For details, refer to the Software Guide.
When the LCD A displays the following, press [OK].
1
A L I G N P R I N T H E A D
P R E S S O K K E Y
The machine will print a horizontal pattern, and the LCD will display:
C H A N G E H V A L U E
A 0
Column A Value for column A
2
In column A on the printout, note which box has the most solid image. Note the
value next to this box and use
Then press [OK].
3
Repeat step 2 for columns B to K.
4
When values for all columns have been entered and the LCD displays the
following, press [#] to return to standby mode.
P R I N T V E R T . P A T T E R N ?
Y E S = ( A ) N O = ( # )
[2] or [3] on the operation panel to enter it.
BAD
SAMPLE
Least solid
box
GOOD
SAMPLE
Most solid
box
A
NOTE
• If streaks appear on the printed
surface when you use the machine,
perform the vertical printhead
alignment. For details, refer to the
User's Guide.