Automatic Dialing - Canon MultiPASS L6000 User Manual

Automatic Dialing

You can send a document using one-touch speed dialing, coded speed
dialing, or group dialing. You must register the one-touch speed dialing
numbers, the coded speed-dialing numbers, and the group dialing
numbers using the MultiPASS Desktop Manager before you can send
documents using these automatic dialing methods. See Setting Up Your
Speed Dial Assignments on page 3-18.
1
Load the
document.
4-4 Sending Faxes With the MultiPASS L6000
When the document has been sent successfully, the display
shows this message.
The MultiPASS automatically redials if the receiving fax does
not answer, if the line is busy, or if a transmission error occurs.
You can specify the number of times it redials using the
Automatic Retries option in the Send Fax dialog box of the
MultiPASS Desktop Manager (see page 8-4). If all redial
attempts fail, the MultiPASS beeps intermittently for a few
seconds. If this happens, check the fax number and try sending
the fax again.
If the light is flashing, correct the error described in the
ALARM
LCD display, and then press
operator panel to remove the document from the ADF (see
page 10-3).
Place the document facedown in the ADF.
DOCUMENT READY
TRANSMITTING OK
. You may need to open the
STOP
Chapter 4