Copying and Scanning With
the MultiPASS L6000
You can use the MultiPASS L6000 as a copier and a scanner. This
chapter describes:
Setting the document feed lever
Copying documents using the operator panel
Scanning documents with the MultiPASS L6000
Setting the Document Feed Lever
To copy or scan, you set the document in the Automatic Document
Feeder (ADF). See the instructions starting on page 1-12 for details.
You use the document feed lever on the ADF to select multiple documents
( ) or single sheets ( ). Always set the document feed
lever to single sheets and manually feed the following types of documents:
Thick paper
Thin paper
Small documents (postcards, business cards)
Documents with uneven surfaces
Photographs
Special types of paper
Chapter 6
DOCUMENT FEED LEVER
Copying and Scanning With the MultiPASS L6000
6
6-1