Canon MultiPASS L6000 Software Manual page 206

To select a single annotation:
Click the Select Annotations button on the Annotations toolbar. Then
click the annotation.
To select Multiple Annotations:
With the Select Annotations button selected, hold down the Shift key and
click each annotation. You cannot resize an annotation using this method.
Moving an Annotation
You can move an annotation from one position to another.
To move an annotation:
Select the annotation and drag it to the desired location.
Resizing the Annotation
When you create an annotation, you draw it to the desired size. If the
original size proves unsuitable, you can resize the annotation.
To adjust the size, click the border of the annotation and drag any sizing
handle.
Aligning Annotations
When placing annotations in the layout area, you may be concerned that
they properly align, to make them more visually appealing. You can align
two or more selected annotations, based on the position of the first field
you select. The first annotation selected in the set of fields to be aligned is
the anchor for the alignment.
You can align annotations, based on the first selected annotation, by their
top, bottom, left, or right border.
You can also center the annotations horizontally with one another, in a
row, or vertically with one another in a column.
To align annotations:
1. Select the two or more annotations you want to align.
7-62 Working with Documents in the Desktop Manager Chapter 7