Canon MultiPASS L6000 Software Manual page 181

Straightening a Document Display
You may need to straighten the document base image before you begin
adding text or graphics to it. For example, you may have received a fax
that was not perfectly straight.
To straighten a document:
1. On the Image toolbar, click the Straighten button.
Rotate Clockwise
Rotate Counter Clockwise
2. On the Straighten toolbar, click the Rotate Clockwise or Rotate
Counterclockwise button. to rotate the crosshairs until it aligns with
the document image.
3. Click the Straighten button to have the system adjust the document
image to its properly aligned position.
Adjusting the Display Size
The MultiPASS Viewer provides you with different levels of
magnification allowing you to work at the most comfortable size. You can
zoom in and out at predefined increments, or specify a particular size or
scale. You can also use adjust the document image size so that the entire
document is visible within the window.
To zoom in or zoom out on the document:
Do one of the following:
On the View menu, point to Zoom, and then select the desired level
of magnification.
On the File toolbar, select the desired level of magnification in the list.
Chapter 7
Straighten
Working with Documents in the Desktop Manager 7-37