Canon MultiPASS L6000 Software Manual page 19

To install the Desktop Manager software:
1. Insert the installation CD into your disk drive.
2. If AutoRun is enabled, the installation Welcome screen automatically
appears.
If installation does not start automatically:
On the Windows taskbar, click Start, and then click Run.
In the Run dialog box, type the following command and click OK
(where D: is your CD drive).
D:\SETUP
3. Follow the on-screen instructions to complete the installation
process.
During installation, follow these guidelines:
Click Next to move from one dialog box to the next.
Make sure you click Next or OK on the current dialog box.
Chapter 2 Installing the Desktop Manager Software 2-5