Appendix; Safety Information - Canon MultiPASS F30 User Manual

Safety Information

This guide uses the following icons to indicate situations that could cause damage or injury:
Always follow the instructions provided in Warnings to prevent potential or serious personal
injury or death as a result of careless operation of the equipment.
Always follow the instructions provided in Cautions to prevent minor injuries to yourself or
damage to the equipment as a result of careless operation of the equipment.
Read and follow all of these cautions and warnings to ensure the safe use of the F30 MFP. To avoid the hazards
of fire, personal injury, or damage to the equipment, never attempt to use the equipment in any way other
than the methods described in this guide.
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
Do not disassemble or modify. There are high-temperature and high-voltage components
inside the F30 MFP which may result in a fire or electrical shock.
Follow all warnings and instructions marked on the F30 MFP.
Location
Do not place the F30 MFP near alcohol, paint thinner or other flammable substances. If
flammable substances come into contact with electrical parts inside the F30 MFP, it may result
in a fire or electrical shock.
Do not block or cover the ventilation port or any openings on the F30 MFP with objects, as this
may result in a fire.
Place the F30 MFP on a flat, stable, vibration-free surface that is strong enough to support its
weight (approx. 22 lb.)
• Make sure the area is free from dust.
• Make sure the location is not affected by extreme temperature changes, and always stays between 50°
and 90.5°F.
• Make sure the relative humidity of the area is between 20% and 85%.
• Keep the F30 MFP away from direct sunlight.
• Do not use or store the F30 MFP outdoors.
• Do not install the F30 MFP near devices that contain magnets or generate magnetic fields, such as
speakers.
• Make sure the F30 MFP is approximately 4 inches away from walls and other equipment for proper
ventilation.
8

Appendix

4 4 9 9