Power Supply - Canon MultiPASS F30 User Manual

F30 MFP User's Manual

Power Supply

Do not damage or modify the power cord and power plug. Also do not place heavy objects on
the power cord, pull on it, or extensively bend it. These actions may cause electrical damage
and result in a fire or electrical shock.
Do not insert or unplug the power plug with wet hands, as this may result in electrical shock.
During electrical storms, turn off the power and disconnect the power cord from the power
outlet.
If dust accumulates around the plug of the power cord when it is connected to a power outlet,
unplug the F30 MFP and wipe the plug with a clean, dry cloth.
Do not plug the F30 MFP into the same circuit with appliances such as an air conditioner,
television, or copier. These devices generate electrical noise which may interfere with your F30
MFP's ability to operate.
Whenever you turn off the power and unplug the F30 MFP, wait at least five seconds before you
plug it in again.
Plug the F30 MFP into a standard 120V AC/60Hz, three-prong grounded outlet. Operate the F30 MFP only from
the type of power source indicated on the F30 MFP's label. If you are not sure of the type of power available,
consult your local power company.
Use only the power cord that came with the F30 MFP.
Turn off the power and unplug the F30 MFP in the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has spilled into the F30 MFP.
• If the F30 MFP has been exposed to rain or water.
• If the F30 MFP does not operate normally when you have followed the instructions in the guides included
with your machine. Adjust only those controls that are covered by the instructions in the guides since
improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
• If the F30 MFP has been dropped or damaged.
• If the F30 MFP exhibits a distinct change in performance, indicating a need for servicing.
Handling
Do not drop paper clips, staples, or other metal objects inside the F30 MFP. Also do not spill
water, liquid or flammable substances inside the F30 MFP. If these items come into contact
with high-voltage parts inside the F30 MFP, it may result in a fire or electrical shock. If these
items are dropped or spilled in the F30 MFP, turn off the power and unplug the power cord
immediately with dry hands. Then, contact the Canon Customer Care Center.
Do not use any highly flammable spray near the F30 MFP. If gas from a spray comes into
contact with the electrical components inside the F30 MFP, it will result in a fire.
Close the platen glass cover or the scanning unit gently to avoid catching your hand. Failing to
do so may result in personal injury.
5 5 0 0