Canon MultiPASS C5000 User Manual page 179

•
Default Action if No Answer to Telephone
You set this option to Receive if you want the MultiPASS C5000
to handle an incoming call, detected as a telephone call that is
not answered, as an incoming fax. If no fax is received, the line is
then disconnected. If you set this option to Disconnect, the
MultiPASS C5000 automatically disconnects the unanswered call
without switching to try and receive a fax.
Answering Machine Mode Options
You select this option to set the MultiPASS C5000 to automatically
switch to fax receive mode if your telephone caller does not speak
within the specified amount of time.
You can set the number of seconds (1-99) the MultiPASS C5000 will
wait before switching to fax receiving mode if the telephone caller
does not speak.
Remote
You select the Receive option so that you can receive a fax by
pressing an ID code on the telephone attached to the MultiPASS
C5000. You assign a remote Identification Number (00-99) that
signals the MultiPASS C5000 to receive the fax. The default number
is 25.
DRPD Switch Options
If you select DRPD for the Receive Mode, you need to set up the
Ring Pattern, Action, Fax ID, and Fax Number. See the DPRD
description starting on page 5-9 for complete details on how these
settings work with your MultiPASS C5000.
8-10 Setup and Other Utilities in the Desktop Manager Chapter 8