Canon FaxPhone L360 User Manual page 42

Connect the power cord as follows:
1. Plug the supplied power cord into the power connector on the back
of the FAX-L360.
2. Plug the other end of the power cord into the outlet.
N
The FAX-L360 has no power switch, so its power is on as long as it is
plugged in. Once connected, though, the unit still needs to warm up
before you can use it.
* The country selection feature is available for certain countries only.
Chapter 2
While the FAX-L360 is warming up, the message PLEASE WAIT
appears in the LCD display:
When you connect the power cord to an AC outlet for the first
time after purchase, DISPLAY LANGUAGE will appear in the
LCD display after PLEASE WAIT. In this case, set the language
for the LCD display, and the country*. (See "Setting the Display
Language and Country*" on page 2-19.)
When the date, the time, the receive mode, and the resolution
mode appear, the FAX-L360 is in standby mode and ready for
use:
P L E A S E W A I T
3 1 / 1 2 2 0 0 2 T U E 1 0 : 0 0
F a x O n l y S T A N D A R D
Setting Up Your FAX-L360
2-17