Power Ratings - YASKAWA iQpump1000 User Manual

A.1 Power Ratings
A.1 Power Ratings
u
Three-Phase 200 V Class Drive Models 2A0004 to 2A0030
Item
Drive Model
Maximum Applicable
Motor Capacity (HP)
Input Current (A)
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity
<4>
(kVA)
Rated Output Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL/CE standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency default setting is Swing PWM 1 (C6-02 = 7). C6-02 settings 1, 7, 8, 9, and A do not require current derating. All other settings
raise the carrier frequency and require current derating.
316
Table A.1 Power Ratings (Three-Phase 200 V Class)
ND Rating
<1>
<2>
ND Rating
ND Rating
<5>
ND Rating
<5>
ND Rating
2A0004 2A0006 2A0008 2A0010 2A0012 2A0018 2A0021 2A0030
0.75 1 2
3.9 7.3 8.8
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc
2.2 3.1 4.1
1.3 2.3 3
3.5 6 8
ND Rating: 120% of rated output current for 60 s
(Derating may be required for applications that start and stop frequently)
User-adjustable between 1 and 15 kHz
Three-phase 200 to 240 V (proportional to input voltage)
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
Specification
3 3 5
10.8 13.9 18.5
-15 to 10%
±5%
5.8 7.8 9.5
3.7 4.6 6.7
9.6 12 17.5
<5>
400 Hz (user-set)
7.5 10
24 37
<3>
14 18
8 11.4
21 30