Integrated Peripherals - ECS NFORCE4M-A Manual

36

Integrated Peripherals

These options display items that define the operation of peripheral components on
the system's input/output ports.
IDE Function Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
OnChip IDE Channel0
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
OnChip IDE Channel1
Secondary Master PIO
IDE Secondary Slave PIO
Secondary Master UDMA
Secondary Slave UDMA
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated on the
motherboard.
Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Integrated Peripherals
IDE Function Setup [Press Enter]
RAID Config [Press Enter]
Onboard Device [Press Enter]
SuperIO Device [Press Enter]
IDE HDD Block Mode [Enabled]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Phoenix-Award WorkstationBIOS CMOS Setup Utility
IDE Function Setup
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[All Enabled]
[Enabled]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults
Item Help
Menu Level
F7:Optimized Defaults