ECS NFORCE4M-A Manual page 44

38
Onboard Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Onchip USB
USB Legacy Support
USB Mouse Support
AC97 Audio
Onboard Lan
Onchip USB (V1.1+V2.0)
This item enables users to enable or disable the onchip USB function, setting it to be USB1.1
or USB2.0 compatible.
USB Legacy Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the
system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
AC'97 Audio(Auto)
Enables and disables the onboard audio chip. Disable this item if you are going to install a
PCI audio add-in card.
Onboard Lan (Enabled)
Enables or disables the onboard Lan function.
Press <Esc> to return to the Integrated Peripherals page.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Onboard Device
[V1.1 + V2.0]
[Enabled]
[Enabled]
[Auto]
[Enabled]
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults