1. Manuals
  2. Brands
  3. ECS Manuals
  4. Motherboard
  5. PF21 Extreme
  6. User manual

ECS PF21 Extreme User Manual

Motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for ECS PF21 Extreme

Summary of Contents for ECS PF21 Extreme

  • Page 2: Table Of Contents

    Headers and Connectors................1-7 ........ Using AWARD Flash to update your BIOS..3-1 Jumpers.....................1-13 ....... Using ECS Top-Hat Flash to recover your BIOS. .3-2 Rear Panel....................1-14 The Main Menu..................3-2 CHAPTER 2 Standard CMOS Features............3-3 Installing the CPU & the CPU cooling fan..........2-1 Advanced BIOS Features............3-4...
  • Page 3 Frequency/Voltage Control..............3-17 Load Performance Defaults...............3-19 Load Optimized Defaults..............3-19 Set Supervisor/User Password............3-20 Save & Exit Setup................3-20 Exit Without Saving.................3-20 CHAPTER 4 Software CD Information.................4-1 Running the Software CD.................4-1 Setup Tab....................4-1 Application Tab..................4-2 Read Me Tab....................4-2 Software Utilities Introduction..............4-2 Multi-Language Translations Legal Notices...
  • Page 4 This chapter entails the newest technology and rich features on the Photon Extreme motherboard.
  • Page 5 Reference Introduction............1-1 Package Check List...........1-1 Feature Summary...........1-2 Special Features..........1-3 Major Components........1-5 Headers and Connectors........1-7 Jumpers............1-13 Rear Panel...........1-14...

  • Page 6: Chapter 1 Introduction

    Motherboard User’s Guide Installation CD The PF21 Extreme is the next generation of high performance motherboard designed to support the LGA775 socket Intel Pentiun4 Processors. This motherboard has an ATX form factor that uses a 6-layer printed circuit SATA Power Cable...

  • Page 7: Feature Summary

    1.3 Feature Summary • LGA775 Socket for Intel Pentium 4 processor IEEE 1394a • VIA VT6307 IEEE1394a controller • FSB 1066/800MHz (266/200MHz Core Clock) • Supports 2 x IEEE1394a portrs • Supports Hyper-Threading Technology Audio • CMI9880 8-channel audio CODEC •...

  • Page 8: Special Features

    Special Features Extreme Power Extreme Power Extreme Power Extreme Power Extreme Power • 1 x Floppy connector- supports 360K ~ 2.88M Bytes, 3 Mode FDDs or LS120 Uncompromising DVD Device plug with USB-like • 2 x IDE connectors audio quality! •...
  • Page 9 All the USB 2.0 Become your own BIOS More options for data Cool operations, cool connectivity you’ll ever ‘doctor’! storage! appearance! need! Eliminate data highway A cooling channel with a Memory module alert! More port options! roadblocks! fansink placed on top of the PWM controller! Fuzzy logic design for Ultra sound quality!

  • Page 10: Major Components

    1.5 Major Components 1. CPU socket LGA775 surface mount, Zero Insertion Force socket for latest Intel Pentium 4 Processors support FSB 1066/800MHz (266/ 200MHz Core Clock) 2. Dual-channel DDR2 DIMM sockets These four 240-pin DIMM sockets support up to 4GB system memory using unbuffered DDR2 533/400 DDR DIMMs.
  • Page 11 2.0 ports, Azalia Audio interface, and PCI 2.3 interface. 13. 10/100Mbps LAN Controller 7. PCI Express x16 (PCI-E1) slot The 10/100Mbps LAN delivers a transfer rates up to 10/100 Mbps. This 925XE has one x16 PCI Express slot, which is intended for an 14.

  • Page 12: Headers And Connectors

    1.6 Headers and Connectors 1. ATX12V (ATX 12V Power Connector, 4 pin, White) This connector supplies the CPU operation voltage (Vcore). Don’t forget to connect the 4-pin ATX 12V connector, otherwise the system cannot boot up. 2. CPU_FAN1 (CPU Fan Connector, 4 pin, White) Please note that a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating.
  • Page 13 3. ATX1 (ATX PWR Connector, 24 pin, White) 5. FDD1 (Floppy Connector, 34-1 pin, Black) Please connect the floppy drive ribbon cables to FDD. It supports 360K, 12M, 720K, 1.44M and 2.88M bytes floppy disk types. AC power cord should only be connected to your power supply until after ATX power cable and other related devices are firmly connected to the motherboard.
  • Page 14 7. SYSFAN1/SYSFAN2/SYSFAN3(System Fan Connectors, 3 pin, 9. LPT1 (Onboard LPT Port, 26-1 pin, Black) White) If you installed wrong direction, the chip fan will not work. Sometimes This 25-pin port connects a parallel printer, a scanner, or other will damage the chip fan. devices.
  • Page 15 11. CHS1 (Chassis Intrusion Detect Header, 2 pin, Black) PANEL1 (Front Panel Switch/LED Header, 10-1 pin) This header allows users to detect unauthorized intrusion to the case. It will alert users with a warning message when the case is turned on. The front panel connector provides a standard set of switch and LED 12.
  • Page 16 15. USB3/USB4 (Front USB Headers, 10-1 pin, Yellow) 17. SMB1 (SMBus Header, 6-1 pin, Black) This connector allows you to connect SMBus (System Management Bus) If the USB ports on the rear panel are inadequate, two USB headers are devices. Devices communicate with an SMBus host and/or other SMBus available for additional USB ports.
  • Page 17 19. AUDIO1 (Front Panel Audio Header, 10-1 pin, Purple) 21. NBFAN1 (Northbridge Fan Connector, 3 pin, White) If you installed wrong direction, the chip fan will not work. Sometimes will damage the chip fan. This is an interface for the Intel front panel audio cable that allows convenient connection and control of audio devices.

  • Page 18: Jumpers

    1.7 Jumpers 1. BIOS_WP1 (Flash Protect) This jumper enables you to prevent the BIOS from being updated (flashed). Open: Disable (Default) Short: Enable 2. JP1 (Clear CMOS) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.

  • Page 19: Rear Panel

    1.8 Rear Panel 6. Center/Bass Jack * This jack connects a tape player or other audio sources. In 8-channel mode, the function of this jack is Center/Bass speaker out. 7. Front Out Jack * This jack connects a tape player or other audio sources. In 8-channel mode, the function of this jack is Front speaker out.
  • Page 20 This chapter explains the hardware setup procedure for this motherboard, such as installing the CPU, memory modules, expansion cards, as well as the jumpers.
  • Page 21 Reference Installing the CPU & the CPU cooling fan...2-1 Installing Memory Module.........2-1 Connecting IDE, Floppy and SATA cable...2-2 Installing Motherboard in a case......2-2 Connecting IDE, Floppy & SATA Device...2-3 Installing Expansion cards........2-3 Connecting the Power supply cable....2-4 Powering up............2-4...

  • Page 22: Installing The Cpu & The Cpu Cooling Fan

    2.1 Installing the CPU & the CPU cooling fan F. Fasten the cooling fan supporting base A. Unload the cap onto the CPU socket on the motherboard. · Use thumb & forefinger to hold the G. Make sure the CPU fan is plugged to the lifting tab of the cap.

  • Page 23: Connecting Ide, Floppy And Sata Cable

    Table A: Recommended dual-channel DDR2 configurations 2. Connect the SATA cable to the SATA hard drive or the connector on the motherboard. DIMM1 DIMM2 DIMM3 DIMM4 Dual Channel √ √ √ √ √ √ √ √ √ √ √ IDE connector FDD connector SATA connector Notes:...

  • Page 24: Connecting Ide, Floppy & Sata Device

    3. Double check to make sure that the underside of the motherboard is 2.6 Installing Expansion cards not touching the case or else shorting may occur and make sure that 1. Remove the slot covers from the case where you will be installing the slots and I/O connectors line up with the holes on the back of the expansion cards.

  • Page 25: Connecting The Power Supply Cable

    2.7 Connecting the Power supply cable The ATX power connector is keyed for proper insertion. There are two Users please note that when installing 24- connectors for 4-pin and 24-pin ATX power cable. The plastic clip on pin power cable, the latch of power cable the power connector should lock over the plastic tab on the connector clings to the right side of the motherboard power connector.
  • Page 26 In this chapter, you will learn how to adjust the BIOS (Basic Input and Output System). It provides infor- mation on the system’s configuration status and op- tions to setup system parameters.
  • Page 27 3.3-12 Save & Exit Setup............3-20 Updating and Recovering the BIOS....3-1 3.3-13 Exit Without Saving..........3-20 3.2-1 Using AWARD Flash to update your BIOS....3-1 3.2-2 Using ECS Top-Hat Flash to recover your BIOS..3-2 The Main Menu..........3-2 3.3-1 Standard CMOS Features........3-3 3.3-2 Advanced BIOS Features.........3-4 3.3-3 Advanced Chipset Features........3-7...

  • Page 28: Entering The Bios Setup Menu

    Standard CMOS Features Frequency/Voltage Control 3. Use the Award Flash Utility from the ECS support CD and download Advanced BIOS Features Load Performance Defaults the last BIOS file for this motherboard from ECS web site...

  • Page 29: Using Ecs Top-Hat Flash To Recover Your Bios

    3.2-2 Using ECS Top-Hat Flash to recover your BIOS 3.3 The Main Menu The ECS Top-Hat Flash kit allow you to restore BIOS from ECS website The main menu of the Setup Utility displays a list of the options that are (www.ecs.com.tw) or ECS support CD, in case you current BIOS on the...

  • Page 30: Standard Cmos Features

    Phoenix-AwardBIOS CMOS Setup Utility 3.3-1 Standard CMOS Features IDE Channel 0 Slave This option displays basic information about your system. IDE HDD Auto-Detection [Press Enter] Item Help Phoenix-AwardBIOS CMOS Setup Utility Menu Level IDE Channel 0 Slave [Auto] Standard CMOS Features Access Mode [Auto] To auto-detect the...

  • Page 31: Advanced Bios Features

    Note: Before attempting to configure a hard disk drive, ensure that you have the Base Memory, Extended Memory and Total Memory configuration information supplied by the manufacturer of your hard drive. These items are automatically detected by the system at start up time. These are Incorrect settings can result in your system not recognizing the installed hard display-only fields.
  • Page 32 Phoenix-AwardBIOS CMOS Setup Utility TM2 Bus VID [0.8375V] CPU Feature This item helps you to set the voltage of the throttled performance that will be initiated when the on die sensor goes from not hot to hot. Item Help Delay Prior to Thermal [16 Min] Thermal Management [Thermal Monitor 1]...
  • Page 33 Hyper-Threading Technology [Enabled] Typematic Rate Setting [Disabled] This item is only available when the chipset supports Hyper-Threading and you are If this item is enabled, you can use the following two items to set the typematic rate using a Hyper-Threading CPU. and the typematic delay settings for your keyboard.

  • Page 34: Advanced Chipset Features

    The disk drive software monitors the internal performance of the motors, media, Phoenix-AwardBIOS CMOS Setup Utility heads and electronics of the drive. The host software monitors the overall reliability Advanced Chipset Features status of the drive. If a device failure is predicted, the host software, through the DRAM Timing Selectable [By SPD] Item Help...
  • Page 35 DRAM RAS# Precharge [Auto] PCI Express Root Port Func (Press Enter) Select the number of CPU clocks allocated for the Row Address Strobe (RAS#) signal Scroll to this item and press <Enter> to view the following screen: to accumulate its charge before the DRAM is refreshed. If insufficient time is allowed, Phoenix-AwardBIOS CMOS Setup Utility PCI Express Root Port Func refresh may be incomplete and data lost.

  • Page 36: Integrated Peripherals

    OnChip IDE Device (Press Enter) 3.3-4 Integrated Peripherals Scroll to this item and press <Enter> to view the following screen: These options display items that define the operation of peripheral components on the system’s input/output ports. Phoenix-AwardBIOS CMOS Setup Utility OnChip IDE Device Phoenix-AwardBIOS CMOS Setup Utility IDE HDD Block Mode...
  • Page 37 IDE DMA transfer access [Enabled] Secondary; on the other hand, when set to Secondary, P0 and P2 are Primary. This item allows you to enabled the transfer access of the IDE DMA. Press <Esc> to return to the Integrated Peripherals page. On-Chip Primary/Secondary PCI IDE [Enabled] The integrated peripheral controller contains an IDE interface with support for two IDE channels.
  • Page 38 Onboard Device (Press Enter) Enable this item if you plan to use a keyboard connected through the USB port in a egacy operating system (such as DOS) that does not support Plug and Play. Scroll to this item and press <Enter> to view the following screen: USB Mouse Support [Enabled] Phoenix-AwardBIOS CMOS Setup Utility Onboard Device...
  • Page 39 SuperIO Device (Press Enter) Onboard FDC Controller [Enabled] Scroll to this item and press <Enter> to view the following screen: Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install an add-in FDC or the system has Phoenix-AwardBIOS CMOS Setup Utility no floppy drive, select Disabled in this field.

  • Page 40: Power Management Setup

    UR2 Duplex Mode [Half] 3.3-5 Power Management Setup This field is available when UART 2 Mode is set to either ASKIR or IrDA. This item This option lets you control system power management. The system has enables you to determine the infrared function of the onboard infrared chip. The various power-saving modes including powering down the hard disk, turning options are Full and Half (default).
  • Page 41 ACPI Suspend Type [S3(STR)] The CPU clock will be stopped and the video signal will be suspended if no Power Management events occur for a specified length of time. Full power function will return Use this item to define how your system suspends. In the default, S3 (STR), the when a Power Management event is detected.

  • Page 42: Pnp/Pci Configurations

    Resume by Alarm [Disabled] 3.3-6 PNP/PCI Configurations When set to Enabled, additional fields become available and you can set the date (day These options configure how PnP (Plug and Play) and PCI expansion cards of the month), hour, minute and second to turn on your system. When set to 0 (zero) operate in your system.

  • Page 43: Pc Health Status

    Init Display First [PCI Slot] 3.3-7 PC Health Status On motherboards that support hardware monitoring, this item lets you Use this item to specify the initial display to be the PCI slot or the graphics chip integrated on the motherboard. Reset Configuration Data [Disabled] Phoenix-AwardBIOS CMOS Setup Utility PC Health Status...

  • Page 44: Frequency/Voltage Control

    System Component Characteristics 3.3-8 Frequency/Voltage Control These fields provide you with information about the systems current operating This item enables you to set the clock speed and system bus for your system. status. You cannot make changes to these fields. The clock speed and system bus are determined by the kind of processor •...
  • Page 45 Async PCIE Clock [CPU Clock/2] Example: CPU Clock Ratio CPU Clock X200 This item correlates to CPU Clock item; when set to Asyn, PCIE Clock and CPU Clock will not operate at the same clock; when set to Sync, PCI Clock and CPU Clock will Installed CPU Clock Speed 1600 MHz operate at the same clock.

  • Page 46: Load Performance Defaults

    3.3-9 Load Performance Defaults 3.3-11 Set Supervisor/User Password If you select this item and press Enter a dialog box will appear. If you select When this function is selected, the following message appears at the center [OK], and then Enter, the Setup Utility loads a set of performance default of the screen to assist you in creating a password.

  • Page 47: Save & Exit Setup

    Supervisor Password has higher priority than User Password. You can use Supervisor Password when booting the system or entering BIOS Setup to modify all settings. Also you can use User Password when booting the system or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled.
  • Page 48 This chapter delivers contents of the ECS support CD.

  • Page 49: Software Cd Information

    Reference Software CD Information........4-1 Running the Software CD........4-1 Setup Tab............4-1 Application Tab..........4-2 Read Me Tab............4-2 Software Utilities Introduction......4-2...

  • Page 50: Software Cd Information

    4.1 Software CD Information 4.3 Setup Tab The support software CD-ROM that is included in the motherboard package The setup tab shows three buttons - Setup, Browse CD, Exit. contains all the drivers and utility programs needed to properly run the Setup button: Click the Setup button to run the software installation bundled products.

  • Page 51: Application Tab

    4.4 Application Tab 2. Click Next . The following screen appears: Lists the software utilities that are available on the CD. 4.5 Read Me Tab Displays the path for all software and drivers available on the CD. 4.6 Software Utilities Introduction AWARD Flash Memory Utility This utility lets you erase the system BIOS stored on a Flash Memory chip on the motherboard, and lets you copy an updated version of the...
  • Page 52 I’m InTouch WinDVD I’m InTouch remote access software allows you to login and work on WinDVD is the world’s most popular DVD player and supports over 30 new your far-away computer, just as if you were sitting behind it! Run features and enhancements such as improved picture quality, easier-to-use programs, transfer files, manage e-mail, contacts and calendar events.
  • Page 53 DPU (Data Process Utility) Specially designed for file protection, security and management this DPU or data processing utility insures the safety of important data through complete file restoration, eliminating file damage even in case of improper operation. User can freely edit original files after a set restore time point. The DPU can even restore even deleted files.
  • Page 54 Résumé des caractéristiques • Socket LGA775 pour processeur Intel Pentium4/Celeron • Contrôleur VIA VT6307 IEEE1394a IEEE 1394a • FSB 1066/800 MHz (Horloge de noyau de 266/200MHz) • Prend en charge 2 x ports IEEE1394a • Prise en charge de la Technologie Hyper-Threading Audio •...
  • Page 55 • 1 x connecteur de lecteur de disquette- prenant en charge 360K ~ 2,88M octets, 3 Lecteurs de disquettes Modes ou LS120 • 2 x connecteurs IDE • 6 x connecteurs ATA Série • 2 x embases USB 2.0 supportant 4 ports USB supplémentaires •...
  • Page 56 Zusammenfassung der Merkmale • LGA775 Sockel für Intel Pentium4/Celeron Prozessor IEEE 1394a • VIA VT6307 IEEE1394a Controller • FSB 1066/800 MHz (266/200MHz Core-Takt) • Unterstützt 2 x IEEE1394a Anschlüsse • Unterstützt Hyper-Threading Technologie • CMI9880 8-Kanal Audio CODEC Audio • Intel 925XE &...
  • Page 57 • 1 x Floppylaufwerkanschluss, unterstützt 360K ~ 2.88M Bytes, 3 Modus Festplatten oder LS120 • 2 x IDE Anschlüsse • 6 x Seriell ATA Anschluss • 2 x USB 2.0 Anschluss, unterstützt zusätzlich 4 USB Anschluss • 1 x 1394a Anschluss •...
  • Page 58 Indice delle caratteristiche • LGA775 Socket per processore Intel Pentium4/Celeron IEEE 1394a • Controller VIA VT6307 IEEE1394a • FSB 1066/800 MHz ( Core clock a 266/200 Mhz) • Supporta 2 x porte IEEE1394a • Supportp di Tecnologia Hyper-Threadig • CMI9880 8-canale audio CODEC Audio •...
  • Page 59 • 1 x connettore floppy - supporta 360K ~ 2,88M Byte, 3 Mode FDDs o LS120 • 2 x connettori IDE • 6 x connettori Seriali ATA • 2 x supporti header USB 2.0 con 4 porte USB supplementari • 1 x 1394a header •...
  • Page 60 Resumen de Características • LGA775 Socket para procesador Intel Pentium4/Celeron IEEE 1394a Controlador VIA VT6307 IEEE1394a • • FSB 1066/800 MHz (Reloj Central 266/200 MHz) Soporta 2 x puertos IEEE1394a • • Soporte Hyper-Threading Technology CMI9880 8-canales audio CODEC • Audio •...
  • Page 61 • 1 x conector Floppy - soporta 360K ~ 2.88M Bytes, FDD de 3 Modos o LS120 • 2 x conectores IDE • 6 x conectores Serial ATA • 2 x cabezales USB 2.0 soporta 4 puertos USB adicionales • 1 x cabezal 1394a •...
  • Page 62 Sumário de Características • Tomada de parede LGA775 para processador Intel Pentium4/ IEEE 1394a Controlador VIA VT6307 IEEE1394a • Celeron Suporta 2 x portas IEEE1394a • • FSB 1066/800 MHz (Relógio Central de 266/200MHz) • Suporta Tecnologia de Hyper-Threading CODEC áudio 8-canais CMI9880 •...
  • Page 63 • 1 x Conector flexível - suporta 360K ~ 2.88M Bytes, FDDs de 3 Modos ou LS120 • 2 x Conectores IDE • 6 x Conectores de Série ATA • 2 x Colector USB 2.0 suporta 4 portas USB adicionais •...
  • Page 64 特徴概要 • Intel Pentium4/Celeron プロセッサ用のLGA775 ソケ • IEEE 1394a VIA VT6307 IEEE1394a コントローラ プロセッサ ット • 2つのIEEE1394a ポートをサポート • FSB 1066/800 MHz(266/200MHzのコアクロック) • • CMI9880 8チャネルオーディオCODEC オーディオ Hyper-Threading 技術対応 • • Intel 925XE & ICH6R Intel Azalia 規格に準拠 チップセット • North Bridge: Intel 925XE •...
  • Page 65 • 1つのフロッピーディスクドライブコネクタ、360Kから 2.88Mバイトの3 Mode FDDとLS120をサポート • 2つのIDEコネクタ • 6つのシリアルATAコネクタ • 2つのUSB 2.0ヘッダーでさらなる4つのUSBポートを増設 可能 • 1つの1394a ヘッダー • 1 つのSMBusヘッダー • 1 つの前面パネルスイッチ/LED ヘッダー • 1つのフロントパネルオーディオヘッダー • 1つのLPT ヘッダー • 1 つのCHS1ヘッダー • 1 つのSMI1 ヘッダー • CD入力ヘッダー • CPUFAN/NB_FAN/SYSFAN コネクタ •...
  • Page 66 특성 요약 • 셀러론 인텔 팬티엄 4/ 프로세서를 위한 LGA775 소켓 • IEEE 1394a VIA VT6307 IEEE1394a 컨트롤러 • FSB 1066/800 MHz (266/200 MHz 코어 클록) • 2 x IEEE1394a 포트 지원 • Hyper-Threading 기술 지원 • 오디오 • Intel 925XE & ICH6R CMI9880 8-채널...
  • Page 67 • 1 x 플로피 커넥터- 360K ~ 2.88M Bytes, 3 모드 FDD 또 는 LS120 지원 • 2 x IDE 커넥터 • 6 x 시리얼 ATA 커넥터 • 2 x USB 2.0 헤더, 추가적으로 4 개의 USB 포트 지원s • 1 x 1394a 헤더...
  • Page 68 功能摘要 • Intel Pentium4/Celeron 處理器的LGA775 插座 • IEEE 1394a ㆗央處理器 VIA VT6307 IEEE1394a 控制器 • 前端匯流排(FSB)為1066/800MHz (266/200MHz的核心時脈) • 支援2個IEEE1394a 埠 • 支援超執行緒(Hyper-Threading)技術 • CMI9880 8聲道音訊CODEC 音訊 • Intel 925XE & ICH6R 晶片組 • 相容於Intel Azalia規格 • 北橋晶片: Intel 925XE • •...
  • Page 69 • 1個軟碟機連接器，可支援360K㉃2.88M位元組之3 Mode 軟碟機及LS120軟碟機 • 2個IDE連接器 • 6個序列ATA 連接器 • 2個USB 2.0接頭，可支援4個額外的USB埠 • 1個1394a接頭 • 1個SMBus接頭 • 1個前面板開關及1個LED 接頭 • 1個前面板音訊接頭 • 1個LPT接頭 • 1個CHS1接頭 • 1個SMI1接頭 • CD音源輸入接頭 • /NB_FAN/SYSFAN連接器 CPUFAN • ATX 尺寸 主機板尺寸 • 305mm x 244mm...
  • Page 70 功能摘要 • 用于 Intel Pentium4/Celeron 处理器的 LGA775 插座 IEEE 1394a • VIA VT6307 IEEE1394a 控制器 • FSB 1066/800MHz (266/200MHz 核心时钟) • 支持 2 个 IEEE1394a 接口 • 支持超线程(Hyper-Threading)技术 音頻 • CMI9880 8 声道音频编解码器 • 芯片组 Intel 925XE & ICH6R • 符合...
  • Page 71 • 1 个软驱接口- 支持 360K ~ 2.88M 字节，3 Mode FDD 或 LS120 • 2 个 IDE 接口 • 6 个串行 ATA 接口 • 2 个 USB 2.0 接头，支持另外 4 个 USB 端口 • 1 个 1394a 接头 • 1 个 SMBus 接头 •...
  • Page 72 Характеристики • Разъем LGA775 для процессоров типа Intel Pentium4/Celeron IEEE 1394a • Контроллер VIA VT6307 IEEE1394a • FSB 1066/800MГц (тактовая частота 266/200MГц ) • Поддержка 2 портов IEEE1394a • Поддержка технологии Hyper-Threading Aудиo • 8-канальный аудио CODEC CMI9880 • Intel 925XE и ICH6R Чипсет...
  • Page 73 Стандарт • 1 гнездо подключения накопителя НГМД с поддержкой форматов 360K ~ 2.88MБ, 3 формата FDD или LS120 • 2 гнезда IDE • 6 гнезд Serial ATA • 2 гнезда USB 2.0 с поддержкой 4 дополнительных портов • 1 гнездо 1394a •...
  • Page 74 Cechy • Gniazdo LGA775 dla procesora Intel Pentium4/Celeron IEEE 1394a • Kontroller VIA VT6307 IEEE1394a • FSB 1066/800MHz (zegar 266/200MHz ) • Obsługuje 2 złącza IEEE1394a • Obsługuje technologię Hyper-Threading Audio • Intel 925XE & ICH6R • 8-kanałowy audio CODEC CMI9880 Chipset •...
  • Page 75 • 1 gniazdo napędu dyskietek, obsługuje formaty 360K ~ 2.88M Bajt, 3 Mode FDD lub LS120 • 2 złącza IDE • 6 złącz Serial ATA • 2 złącza USB 2.0 obsługujące 4 dodatkowe porty USB • 1 złącze 1394a • 1 złącze SMBus •...
  • Page 76 Souhrn vlastností • Patice LGA775 pro procesory Intel Pentium4/Celeron IEEE 1394a • Řadič VIA VT6307 IEEE1394a • Frekvence sběrnice FSB 1066/800 MHz (frekvence jádra 266/200 • Podpora 2 portů IEEE 1394a MHz) • Podpora technologie „Hyper-Threading“ Zvuk • 8kanálový zvukový kodek CMI9880 Čipová...
  • Page 77 • 1x konektor floppy diskových mechanik – podpora 360 kB až 2,88 MB, 3 režimy FDD nebo LS120 • 2x konektor IDE • 6x konektor Serial ATA • 2x rozhraní USB 2.0 s podporou dalších 4 USB portů • 1x rozhraní 1394a •...
  • Page 78 Sumarul caracteristicilor Unitatea • Soclu LGA775 pentru procesoare Intel Pentium4/Celeron IEEE 1394a • Controler VIA VT6307 IEEE1394a • FSB de 1066/800 MHz (Frecvenţă internă de 266/200 MHz) centrală (CPU) • Permite două porturi IEEE1394a • Compatibil cu tehnologia Hypre-Threading Audio •...
  • Page 79 • Un conector Floppy, pentru dischete de 360 KB–2,88 MB, FDD cu 3 moduri sau LS120 • Două sloturi IDE • Şase conectoare ATA seriale • Două conectoare USB 2.0, cu posibilitate pentru alte 4 porturi • Un conector 1394a •...
  • Page 80 Параметри Процесор • Сокет LGA775 за процесор Intel Pentium4/Celeron IEEE 1394a • контролер VIA VT6307 IEEE1394a • Шина FSB 1066/800MHz (266/200MHz Core Clock) • поддръжка на 2 порта IEEE1394a • Поддръжка на технологията Hyper-Threading Аудио Чипсет • Intel 925XE & ICH6R •...
  • Page 81 • 1 конектор за флопидисково устройство с поддръжка на устройства 360K ~ 2.88M Bytes, 3 Mode или LS120 • 2 конектора IDE • 6 конектора Serial ATA • 2 колектора USB 2.0 с поддръжка на 4 допълнителни USB порта • 1 колектор...
  • Page 82 Jellemzők összefoglalása • LGA775 foglalat Intel Pentium4/Celeron processzoroknak Központi IEEE 1394a • VIA VT6307 IEEE1394a vezérlő • 1066/800 MHz-es FSB (266/200 MHz-es központi órajel) egység(CPU) • Két IEEE1394 portot támogat • Támogatja a Hyper-Threading technológiát Audio • 8 csatornás CMI9880 audio CODEC •...
  • Page 83 • Egy floppy meghajtó 360 kB–2,88 MB lemezeknek, 3 üzemmódú FDD meghajtók vagy LS120 • Két IDE foglalat • Hat soros ATA csatlakozó • Két USB 2.0 csatlakozó, és további 4 USB porttal tud működni • Egy 1394a csatlakozó • Egy SMBus csatlakozó...

  • Page 84: Legal Notices

    Legal Notices Copyright Federal Communications Commision (FCC) This publication, including all photograph, illustrations and software, is This equipment has been tested and found to comply with the limits for protected under international copyright laws, with all rights reserved. a Class B digital device, pursuant to Part 15 of the FCC Rules. These Neither this manual, nor any of the material contained herein, may be limits are designed to provide reasonable protection against harmful reproduced without written consent of the author.
  • Page 85 Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: - This device may not cause harmful interference, and - This device must accept any interference received, including inter- ference that may cause undesired operation. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.

Table of Contents