Configuration; Summary; Adding A Panel To An Nv9000 Configuration - GRASS VALLEY NV9000 User Manual

Chapter 4 provides configuration instructions for the NV9616 or NV9608.

Summary

Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adding a Panel to an NV9000 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
NV9616 Panel Configuration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Commitment Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Button Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
This chapter addresses configurers. Operators and other persons not interested in NV9616
or NV9608 configuration need not read this chapter.

Summary

The NV9616 and NV9608 are relatively complex panels. Both have 24 configurable function
buttons and 2 dedicated scroll buttons. The NV9616 has 16 LCD button units; the NV9608
has 8.
Among the function buttons is a fixed set of 10 category buttons. You cannot configure
these buttons as any other type of button. You can create additional category buttons
however. Category buttons provide category mnemonics or category suffixes, or both, and
support device selection using categories and suffixes for sources and for destinations.
The panels have dedicated take buttons. The NV9616 has 16 and the NV9608 has 8. The
take buttons are part of the LCD button units. They operate differently in X-Y mode and MD
mode.
NV9000-SE Utilities is the software with which to configure the NV9616. Figure 4-1,
following, shows the default NV9616 panel configuration page from NV9000-SE Utilities.

Adding a Panel to an NV9000 Configuration

You must create configurations for the NV9616 and NV9608 using NV9000-SE Utilities. We
assume that you are familiar enough with NV9000-SE Utilities that you can understand the
following material. It is not difficult material, but some of the concepts might not be
familiar to everyone.
It takes only a few seconds to add a new panel configuration.

Configuration

13