Fortinet FortiGate-5144C Manual page 62

Shelf Manager CLI
7: "TEST1" Disabled
Channels 0-15 Privilege level: "NO ACCESS"
Include -v to display disabled user accounts. For each user account the command displays:
User ID
l
User name
l
Channel access information for each IPMI channel: the maximum privilege level of that user account on that
l
channel, and channel access flags. If the channel access information is the same for several channels, the output
displays the information for the channel number range.
Adding a user account
Use the following command syntax to add a user account:
user add <user_id> <user_name> <channel_access_flags> <privilege_level> <password>
This command adds a new RMCP user account to the shelf manager. The command also sets the same maximum
privilege level and channel access flags for all channels. Where:
<user_id> is a valid user ID
l
<user_name> is a user name (truncated to the 16 characters without notice)
l
<channel_access_flags> is the first byte of the SetUserInfo commands (only bits 4,5,6 are meaningful)
l
bit 6 enables IPMI messaging
l
bit 5 enables link authentication
l
bit 4 restricts the user to callback
l
<privilege_level> is the user account privilege level
l
<password> is the user account password (truncated to the 16 characters without notice).
l
For example, add a user account with user ID 9, user name
password .
clia user
Pigeon Point Shelf Manager Command Line Interpreter
1: ""
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
clia user add 9 "user_1" 0x40 4 "my-password"
Pigeon Point Shelf Manager Command Line Interpreter
User 9 added successfuly
clia user
Pigeon Point Shelf Manager Command Line Interpreter
1: ""
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
9: "user_1"
Channels 0-15 Privilege level: "Administrator"
Flags: "IPMI Messaging"
FortiGate-5144C 6.2.3 Chassis Guide
user_1 , administrator privilege level, and password my-
Fortinet Technologies Inc.
62