Fortinet FortiGate-5144C Manual page 21

FortiGate-5144C Chassis
FortiGate-5144C fan tray LEDs
LED
H/S (Hot Swap)
OOS (Out of Service)
ACT (Active)
When installing the chassis, make sure there is enough clearance for effective cooling air flow
shows the cooling air flow through the chassis and the locations of the air filter and cooling fans. Make sure the cooling
air intake and warm air exhaust openings are not blocked by cables or rack construction because this could result in
cooling performance reduction and possible overheating and component damage.
Cooling air flow, fan locations, and required minimum air flow clearance
40 mm
100 mm
Front
Cool air
Intake
FortiGate-5144C 6.2.3 Chassis Guide
Description
Normally off. Blinking blue indicates that the fan is starting up.
Normally off. Blinking red indicates the fan is out of service and should be replaced.
Normally solid green. Indicates the fan is operating normally.
Fan
Fan
Air Filter 600 mm
600 mm
Warm air
Exhaust
60 mm
Back
Fortinet Technologies Inc.
. The following diagram
21