Panasonic ER-GC71 Operating Instructions Manual page 13

►Comb attachment
[ ]
Trimming height
(estimate):
1 mm to 10 mm
Indicator 1
Trimming height
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
(mm) (estimate)
Indicator 6
Trimming height
6 6.5 7 7.5 8 8.5 9 9.5 10
(mm) (estimate)
►Comb attachment [
ER-GC71/ER-GC63
Trimming height (estimate):
11 mm to 20 mm
Indicator 11
Trimming height
11 11.5 12 12.5 13 13.5 14 14.5 15 15.5
(mm) (estimate)
Indicator 16
Trimming height
16 16.5 17 17.5 18 18.5 19 19.5 20
(mm) (estimate)
Notes
• Actual hair length will be a little longer than the height
you set.
• Setting of 10.5 mm is unavailable.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
PB017706 - ER-GC63 53 _(01GB)_04-25-19.indd 13
ER-GC71/ ER-GC53
ER-GC63
2 3 4 5
7 8 9 10
]
12 13 14 15
17 18 19 20
Trimming hair
• Do not use when the hair is wet.
A wet hair may stick to the skin or bunch up, making it
difficult to trim.
• To maintain sharpness, remove hair trimmings
between usages.
• Before trimming, comb your hair with a comb.
Adjusting the length around the ears and sides
Holding the clipper with the power
switch facing outwards, trim
around the ears and sides by lifting
the tip of the comb attachment little
by little from the hairline.
• Trim your hair while holding
down your ear with one hand.
How to align the length at the neckline and at the
back of your head
Holding the clipper with the
power switch facing outwards,
trim from the neckline to the
back of your head by lifting the
tip of the comb attachment little
by little from the hairline.
13
2019/4/25 15:04:13