Preparation - Panasonic ER-GC71 Operating Instructions Manual

Preparation

Charging
• Make sure that the clipper is turned off.
1
Connect the appliance plug to the
appliance socket.
2
Plug in the adaptor into a
household outlet.
• Charging is completed after
approx. 8 hours.
• Check that the charge indicator
lamp ( ) glows.
3
Disconnect the adaptor after charging is
completed.
(for safety and to reduce energy usage)
The charge indicator lamp (
after charging is complete. There is no indication to
show that "charging is complete".
PB017706 - ER-GC63 53 _(01GB)_04-25-19.indd 11
Notes
• To keep charging the battery will not affect battery
performance.
• If there is crackling noise on radios or other devices
while charging, charge the clipper using a different
household outlet.
• When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
2
charge the battery once every 6 months.
• When charging the clipper for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the lamp on the main
1
body may not glow for a few minutes. Please charge it
for more than 16 hours in such cases.
• Recommended ambient temperature for charging is
0 °C – 35 °C. Battery performance may decrease
outside of the recommended temperature.
• A full charge supplies enough power for
) continues to glow
approximately 40 minutes of use. (Based on dry
using at 20 °C – 30 °C.)
The operating time may differ depending on the
frequency of use, the operating method and the
ambient temperature.
• You can charge the battery before it is completely
discharged. However, it is recommended to charge
when the battery is completely discharged. The
battery life depends strongly on factors such as how
it is used and stored.
11
2019/4/25 15:04:07