Paper Jams; Information About Paper Jams - Xerox Versant 2100 Press Quick Start Manual

Paper Jams

If a paper jam occurs, a fault screen displays a message on the press control panel
indicating in which area the jam is situated. Follow the instructions provided for clearing
the jam and resuming press operation.

Information about Paper Jams

Review the following list to address paper jams:
When paper jams inside the press, the press stops and a fault message displays.
Follow the instructions displayed on the screen to remove the jammed paper.
Gently remove the paper taking care not to tear it. If paper is torn, be sure to remove
all torn pieces.
If a piece of jammed paper remains inside the press, the paper jam message will
remain on the display.
Paper jams can be removed with the press still powered on. When the power is turned
off, all information stored to the system's memory will be erased.
Do not touch components inside the press. This can cause print defects.
After clearing a paper jam, printing is automatically resumed from the state before
the paper jam occurred.
If a paper jam occurred during printing, press the Start button. Printing is resumed
from the state before the paper jam occurred.
Warning
When removing jammed paper, make sure that no pieces of jammed paper are left in
the press. A piece of paper remaining in the press can cause fire. If a piece of paper is
stuck in a hidden area or paper is wrapped around the fuser unit or rollers, do not remove
it forcefully. You can get injured or burned. Switch off the press immediately and contact
the Customer Support Center.
Xerox ® Versant 2100 Press
Quick Start Guide
6
6-1