Access Codes And Credit Card Numbers; Hold; Pause - Brother MFC-7050C User Manual

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long
distance carriers when you make a call. Rates may vary
depending upon the time and destination. To take advantage of
See
low rates, you can store the access codes or long-distance carriers
Storing
as One Touch numbers. You can store these long dialing
One Touch Dial
sequences by dividing them and setting them up on separate keys
Numbers
p. 8-1
in any combination. You can even include manual dialing using
the dial pad. The combined number will be dialed in the order you
entered it. as soon as you press
You can store "555" on One Touch key
Touch key
dial "555-7000". To temporarily change a number, you can
substitute part of the number with manual dialing using the dial
pad. For example, to change the number to "555-7001" you could
press One Touch
pad.
If you must wait for another dial tone at any point in the dialing
sequence, store a pause at that point in the number by pressing
Redial/Pause
WARNING
You can set up phone credit card numbers the same way.
However, when using combined dialing, do NOT send a cover
page because your credit card number will be on it!

Hold

1
2
3

Pause

Press
you are dialing overseas, you can press
needed to increase the length of the pause.
02
. If you press One Touch
03 and press
. Each key press adds a 3.5 second delay.
Hold
Press to put a call on Hold.
You can replace the handset without disconnecting the call.
Pick up the MFC handset to release the call from Hold.
Picking up an extension handset will not release the call from
Hold.
Redial/Pause to insert a 3.5 second pause between numbers. If
T E L E P H O N E O P E R A T I O N
Start .
03
and "7000" on One
03 02
, , and Start
, , , using the dialing
7 0 0 1
Redial/Pause
as many times as
, you can
9-3