Advanced Receiving Operations; Operation From Extension Telephone; For Fax/Tel Mode Only; Troubleshooting Remote Codes - Brother MFC-7050C User Manual

Advanced Receiving Operations

Operation from Extension Telephone

If you answer a fax call on an extension phone or on an external
phone in the EXT. jack, you can make your MFC take over by using
the Fax Receive Code. When you press the Fax Receive Code
5
1 , the MFC starts to receive a fax.
See
If the MFC answers a voice call and double-rings for you to take
Setting F/T
over, use the Telephone Answer Code to take the call at
5 1
Ring Time
an extension phone.
(For FAX/TEL
If you answer a call, and no one is on the line, assume you're
Mode Only)
p. 6-3
receiving a fax. At the MFC phone, press Start , then hang up. At an
extension phone, press , wait for fax receiving tones
5 1
(chirps), then hang up. At an external phone, press and
5 1
wait for the phone to be disconnected (the screen displays
RECEIVING) before you hang up. (Your caller will have to press
Start
to send the fax.)

For FAX/TEL Mode Only

When the MFC is in FAX/TEL mode, it will use the F/T Ring
Time (double ringing) to alert you to pick up a voice call. If you're
at the MFC, you can lift the handset to answer.
If you're at an extension phone, you'll need to lift the handset
during the F/T Ring Time and press between the double
5 1
rings. If no one is on the line, or if someone wants to send you a
fax, send the call back to the MFC by pressing .
5 1

Troubleshooting Remote Codes

Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is . The preset Telephone Answer
5 1
Code is .
5 1
If you are always disconnected when accessing your external TAD
remotely, try changing the Fax Receive Code from to
5 1
and the Telephone Answer Code from to
5 1
.
9 9 9
6-6
S E T U P R E C E I V E