Setting Ring Delay; Setting F/T Ring Time (For Fax/Tel Mode Only) - Brother MFC-7050C User Manual

Setting Ring Delay

The Ring Delay setting determines the number of times the MFC
Operation from
Extension
rings before it answers. If you have extension phones on the same
Telephone
line as the MFC, keep the Ring Delay default setting of 4.
p. 6-6
and
1
For FAX/TEL
2
Mode Only
p. 6-6
3
4
Setting F/T Ring Time
(For FAX/TEL Mode Only)
See
If you set the answer mode to FAX/TEL, you'll need to determine
Operation from
how long the MFC will send you its special double ring when you
Extension
have a voice call. This ringing happens after the initial ringing
Telephone
from your telephone company (Ring Delay). Only the MFC rings,
p. 6-6
for 20, 30, 40 or 70 seconds; no other phones on that number will
ring the special double-ring. However, you can answer the call on
any extension phone (in a separate wall jack) on the same phone
number as the MFC.
1
2
3
Now, when a call comes in and the MFC is set to FAX/TEL mode,
all phones on this line will ring the number of times you selected
in Ring Delay.
You can let the MFC pick up and detect if it's a fax or voice call.
If it's a fax call, the MFC prints the fax. If it's a voice call, the
MFC signals you with a double ring for the length of time you
selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the MFC
continues for the set time.
Function
Press , 1 , 2 ,
Press or to select Ring Delay and press
Press or to select how many times the line rings before
the MFC answers (00–04) and press
line doesn't ring at all.)
Press Stop to exit.
Function
Press , 1 , 2 ,
Press or to select how long the MFC will ring to alert
you that you have a voice call and press
RING TIME:20 SEC
Stop
Press to exit.
1 .
Set
. (If you select 00, the
2 .
Set
S E T U P R E C E I V E
Set
.
.
6-3