Exit; Installing The Brother Software - Brother MFC-7050C User Manual

Exit

Click Exit to exit the CD-ROM window, or click Return to return
to the previous window.

Installing the Brother Software

1
2
The Brother LOGO will be displayed on the screen.
If you are using Windows NT
message will appear on the screen: You are running Windows NT
3.51 or earlier. Brother MFL Pro does not support this version of
Windows NT
REINSTALL MFL Pro!!
If you are using Windows NT
logged-in as the Administrator, an error message will appear
explaining the problem.
14-6
S E T T I N G
Insert the Brother CD-ROM into your CD-ROM drive.
Enter the command for your version of Windows
After you insert the Brother CD-ROM, you must type the
appropriate command for your version of Windows
If you are using Windows
Manager, click File, then Run. Then type x:\SETUP.EXE.
("x" is the drive letter for your CD-ROM drive.) This will
start the Software Installation program.
If you are using Windows
Workstation Version 4.0, the Software Installation
program appears automatically when you insert the Brother
CD-ROM.
®
For Windows 95/98 and Windows NT
Version 4.0, you can also click on Start at the Desktop,
select Run and then enter x:\SETUP.EXE.
®
. YOU MUST UPGRADE TO WINDOWS NT 4.0 AND
U P M F C
®
3.1x, from the Program
®
95/98 or Windows NT
®
®
3.51 or earlier, the following error
®
Workstation 4.0 and you are not
W I T H Y O U R
®
, if needed:
®
:
®
Workstation
®
C O M P U T E R