Options/Sender Tab; Sending From Other Windows Applications; If You Are Using Windows 95/98 - Brother MFC-7050C User Manual

Options/Sender Tab

Use the Options/Sender tab to specify the billing code, resolution,
request e-mail notification, when to send the fax and a change to
the sender information.
To set the defaults of all your faxes, click the Set Defaults button in
the lower left-hand corner. Options modified in the Send Fax window
apply to this fax only and appear on the cover sheet of your fax.
Sending from Other Windows
When you install the Print Driver (included with NetCentric
FaxStorm) onto your computer, it will be available in your list of
printers to use for faxing from any Windows
If You Are Using Windows
1
Open the document you wish to fax.
2
Select Print from the File menu.
3
Select NetCentric
4
Click Properties (or click the button that displays the
properties of the printer in the application you are using).
5
Select Print to Fax and click OK to close the Properties dialog
box.
The Print Driver saves these properties until you change them
again.
If you are printing to a file rather than faxing, open the
Properties dialog box to select Print2File.
6
Click OK to print the document.
The Send Fax dialog box appears.
7
Enter the recipient's fax number, select a cover page and any
options, if desired.
U S I N G N E T C E N T R I C ™ F A X S T O R M
®
® 95/98
™
FaxStorm from the list of printers.
Applications
™
®
application.
19-11