3550-US-5.0
BASIC SETUP TO RECEIVE FAXES
Setting the Print Density
Setting the Print Density
Setting the Print Density
Setting the Print Density
Setting the Print Density
You can set print conditions with the following steps. Press Z (left arrow) to make the print
lighter and X (right arrow) to make the print darker . If the print is still too light or too dark,
you can adjust it further by turning the Print Density Dial located in the right corner under
the top cover. (Remove the drum unit to find the dial. See page 13-12 for more information.)
KEYS TO PRESS
1. Press Function.
2. Press 5.
3. Press 9.
The display will alternate
messages.
4. Use Z (left arrow) or X (right
arrow) to change the settings.
5. Press Set.
6. Press Stop to exit.
Toner Save Function
Toner Save Function
Toner Save Function
Toner Save Function
Toner Save Function
This function lets you extend the life of the toner by conserving its use. When the Toner Save is
set to ON, the print appears somewhat lighter. This feature is also available when copying. The
default setting is OFF.
KEYS TO PRESS
1. Press Function.
2. Press 5.
3. Press 7.
4. Press Z (left arrow) or X (right
arrow) to select either ON or OFF.
Example: ON.
5. Press Set.
6. Press Stop to exit.
RECEIVING FAXES AND OTHER CALLS
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6
1 . T E M P . S E T T I N G S
5 . U S E R
9 . P R I N T
-
SELECT
9 . P R I N T
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6
1 . T E M P . S E T T I N G S
5 . U S E R
7 . T O N E R
T O N E R
SELECT
T O N E R
7 . T O N E R
1 5 : 2 5
O P T I O N S
D E N S I T Y
+
{
}
&
SET
D E N S I T Y
1 5 : 2 5
O P T I O N S
S A V E
S A V E : O F F
{
}
&
SET
S A V E : O N
S A V E
7-8
7-8
7-8
7-8
7-8