Remote Control Commands; Printing A Fax Message; Memory Status - Brother INTELLIFAX IntelliFAX 3550 Owner's Manual

3550-US-5.0

Remote Control Commands

Remote Control Commands Remote Control Commands
Remote Control Commands Remote Control Commands
You can control your fax machine with the following remote control commands.
Remote control command
9 5 Changing Fax Forwarding
/Paging setting
1 OFF
2 Fax Forwarding
3 Paging
4 FAX FWD No.
5 FWD No. Confirm
6 Fax Storage ON
7 Fax Storage OFF
9 6 Retrieve FAX
1 Memory Status List
2 0 0 Retrieve all FAXES
2 "MSG No." 00
Retrieve by MSG
number
3 Erase FAX in the
memory
9 7 Check the receiving status
1 FAX
9 8 Change Answer Mode
1 TAD
2 F/T
3 Fax
9 0 Exit

Printing a Fax Message

Printing a Fax Message Printing a Fax Message
Printing a Fax Message Printing a Fax Message
You can print a fax message that is stored in the memory.
KEYS TO PRESS
1. Press Function.
2. Press 8.
3. Press 4.
4. Press Start.
5. Press Stop to exit.
Detail Operation
If you hear one long beep, the change is accepted. If you hear three
short beeps, you can not change it because the conditions (ex.
registering fax forwarding or paging number) have not been com-
pleted. You can register your fax forwarding number by using 4.
FAX FWD No. (see page 10-8). Once you have registered the number,
the machine automatically will turn to FAX FWD:ON mode. To
receive a Memory Status List, enter 961 (see page 10-8). Check the
List to make sure the Fax Forwarding number you registered is
correct. Then enter the confirmation command 955. Now the ma-
chine will start Fax Forwarding.
You can set FAX STORAGE ON or OFF.
You must call from a remote fax machine to receive the Memory
Status List or stored fax message(s). (See page 10-8.)
If you hear one long beep, you can erase fax message(s) from the
memory.
You can check whether your fax machine has received any fax
message(s). If yes, you will hear one long beep. If no, you will hear
three short beeps.
If you hear one long beep, you can change the Answer Mode. If you
hear three short beeps, you can not change it.
After a long beep, you can exit remote control.
THE DISPLAY WILL SHOW:
FAX
1 . T E M P . S E T T I N G S
8.REMOTE
4 . P R I N T
PRESS
P R I N T I N G
4 . P R I N T
REMOTE FAX OPTIONS
IN MEMORY:03
FAX OPT
F A X
START KEY
F A X
10-7 10-7 10-7 10-7 10-7