Printing A Reduced Incoming Fax (Auto Reduction); Setting The Print Density - Brother FAX-2800 Owner's Manual

1
Press Menu/Set, 2, 1, 3.
2
Use to select ON,
or
and then press Menu/Set.
3
Press Stop/Exit.
Printing a Reduced Incoming Fax
(Auto Reduction)
You can always reduce the size of an incoming fax to a fixed percentage,
regardless of the size of the paper in your FAX/MFC. ON lets the FAX/MFC
choose the level of reduction for you.
1
Press Menu/Set, 2, 1, 5.
2
Use to select
or
and then press Menu/Set.
3
Press Stop/Exit.

Setting the Print Density

If your FAX/MFC is printing too light or too dark, you can adjust print density,
making your printed documents darker or lighter. The new setting will remain
until you change it again.
1
Press Menu/Set, 2, 1, 6.
2
Press to make print lighter or
to make print darker, and then press
Menu/Set.
3
Press Stop/Exit.
5 - 4
S E T U P R E C E I V E
SEMI or OFF,
ON (or OFF),